BPChem Repairs
long-lasting defense against moisture
Cost Effective
Reliable
PRODUCT
DESCRIPTION
USES
DOSAGE/ CONSUMPTION/ COVERAGE/ YIELD
PACKING
BPChem ZINC PR
Two component zinc rich epoxy based anti-corrosive primer to provide galvanic protection to the rebar.
Zinc rich primer is the recommended anti-corrosive primer for partially exposed reinforcement and structural steel embedded in concrete.
8.0 m2/Litre / Coat
3.2 Kg Combo Pack
BPChem RENDERCE M FC
Single component, polymer modified cementitious honeycombs and pinhole filler.
For application to minor imperfections in concrete and masonry surface upto 5mm.
6.0m2 @3mm Thickness
25 Kg Bags
BPChem MICROCRETE
Single component high strength free flow non-shrink micro-concrete for precision structural and concrete patch repairs.
Used for conventional repair of honeycombed concrete and to fill recesses of broken structure of concrete. Make use of its non shrink and excellent bonding properties to repair soffit of beams, slabs and RCC column jacketing.
9 Itrs/ 20 kg bag
20 Kg Bags
BPChem RENDERCE M GP
Single component, general purpose shrinkage controlled, polymer modified, cementitious patch repair mortar system.
General purpose polymer modified repair mortar for vertical and overhead patch repairs of concrete and masonry elements. Rendering of honey combed concrete. For doing patch repairs by hand or trowel application, where form work cannot be erected.
1.85 kg / m2/ mm
25 Kg HDPE Bags
BPChem CRACKFILL GP
Ready to use filler for masonry and plaster cracks in pasty form with excellent weather durability and flexibility.
Internal and external plastered brick masonry wall cracks upto 5 mm width.
25-30 running meter/kg (for crack size 5 mm width and 5 mm depth)>/ mm
500 gm & 1 kg
PRODUCT
DESCRIPTION
USES
DOSAGE/ CONSUMPTION/ COVERAGE/ YIELD
PACKING
BPChem RENDERCEM 2K
2 pack thixotropic, polymer modified cementitious patching and adhesive mortar.
Used for thin layer applications to seal surface cracks upto 5 mm, blow holes, honeycombs to give a smooth level finish.
2.15 kg / sqm / 1 mm Thickness
25Kg + 8Kg Combo Pack
BPChem INSTA PLUG
Rapid setting cement based waterleak plugging mortar
For the rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.
Yield: 0.55 Itrs / kg
1,5 &25 kg Bags
BPChem POLYCRETE EP
Epoxy resin based patch repair mortar. Both clear and pigmented versions are available.
For lining ETP, STP and chemical tanks, cavity or pot hole repairs on factory floors, garages, repairing dams, (pointing) spillways, etc. where abrasion resistance is required alongwith high strength.
2m2 @ 5mm Thickness / Pack
20 kg Combo Pack
BPChem GROUT LVEP
Epoxy resin based 2-component high strength injection grout for very small gaps between 0.2- 10 mm. Moisture insensitive epoxy injection grout also available.
For injecting into cracks, honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps having deep penetration and dynamic load resistance. It has good chemical resistant properties and bonding strength to most contact surfaces.
Yield: 0.95 Itr/ kg
1,3 Kg Tin Containers
BPChem POLYGROUT 1K
Flexible polyurethane injection foam for inhibiting continuous water infiltration.
To stop high water intrusion into cracks, joints and cavities in concrete underground structures, masonry or natural stone structures with deep penetration owing to its low viscosity.
Depends on the concrete porosity.
20 Itr Drums
PRODUCT
DESCRIPTION
USES
DOSAGE/ CONSUMPTION/ COVERAGE/ YIELD
PACKING
BPChem POLYGROUT 2K
Elastic polyurethane injection resin for permanent watertight sealing.
To permanently seal dry, damp or waterbearing and joints in concrete, masonry or natural stone structures. Remains flexible and can absorb limited movement.
Depends on the concrete porosity.
20.6 Ilr Combo Pack
BPChem POLYCRETE SBR
Multipurpose SBR latex for waterproofing & structural repair system by using as mortar modifier.
Bathroom and Toilet waterproofing, repair mortar, injection grouting, bonding agent, corrosion protection of steel, heavy duty floor topping, polymer modified concrete.
5-7 kg POLYCRETE for 50 kg cement when used as a polymer modified repair mortar.
500 gm, 1,5, 20, 50, 200 Kg
BPChem DEMOLEX
Non-explosive expansion demolition grout.
It is designed for demolition of concrete, rocks, boulders and quarrying of natural stones that will be accomplished smoothly and efficiently. And the sensitive areas where vibration must be minimized.
Refer the Product Data sheet
10 Kg Bag
BPChem KLEEN RR
Rust remover, cleaning and etching agent.
It is used as a rust remover from steel bars prior to encasing in concrete/micro concrete. It can also be used on other steel surfaces prior to coating with epoxy systems.
2.0 - 2.5m2/ltr approximately
1,5, 20 Ltrs
Be sure with BPChem
Professional Approach
Our team is well trained on handling the machines and instruments. Discussions & communications we have is done with utmost respect with valuing each and every input from client.
Systematic
A systematic process in our work prevents oversights, which makes compliance more accurate. It will also prevent the repetition of work and reduce effort, time and costs thus making compliance management more efficient as well.
Timely Finish
With years of experience, strong system and with customer-centric team of BPTians we finish the projects well within the time frame.
Pre & Post Reports
We always inspect the site and form a pre report & when work is completed we perform a final Post project report and hand the complete project report to our clients for future reference.
“We've choosing BPT Waterproofing for over 10 years now and I can honestly say they are the best in the business. The workmanship is of the highest quality and I have never had a single issue with water leakage in any of our projects even after all these years! The team is always reliable, professional, and friendly too. Highly recommend BPT if you're looking for complete waterproofing solutions.”
Mr. Varun, JMD of a renowned Builder Company
Relevant Projects Case Studies
Project A
Chennai
Project B
BANGALORE
